Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Lennox Air Duct Cleaning in Beverly Grove, CA
We provide independent Lennox air duct cleaning service throughout Beverly Grove’s 90048, with the equipment and repair skills to handle the aging Lennox forced-air systems that dominate this neighborhood’s mid-century apartments and duplexes – the same expertise we bring to Cheviot Hills. The one thing that makes our Lennox work different here: we’re not a dealership and we’re not a generalist. We’re a dedicated duct and vent shop, and we understand how Beverly Grove’s shared-duct rental stock fails differently than single-family homes would. Call (866) 472-7239 for a free estimate.
We’ve spent years pulling plenum covers and return chases out of original Lennox furnaces still running in Beverly Grove’s low-rise buildings off Fairfax and La Cienega. That hands-on time matters because Lennox equipment from the 1950s through the 1980s was built differently than what’s being installed today. Short, rigid galvanized runs. No modern filter racks. Return chases that serve multiple units from one plenum. Our work here reflects what’s actually behind those registers, not a generic checklist. For broader Lennox expertise, see our Lennox sales & service page.
Why Beverly Grove Residents Choose Us for Lennox Service
Noel Fairbanks grew up near Reseda Boulevard and has spent most of his life in the San Fernando Valley, so he knows what happens to ductwork in this climate. He trained through the HVAC/R Technology program at Los Angeles Pierce College in Woodland Hills, then spent years focused exclusively on duct cleaning before starting his own operation. When he shows up to a Beverly Grove building, he’s looking at the plenum first, not the sales script.
Our approach is simple: Rotobrush and Nikro professional duct-cleaning systems, not shop-vacs. Abatement Technologies negative-air containment so loosened debris doesn’t recirculate into the living space. And if a duct is cracked, disconnected, or missing a filter rack entirely, we fix it. We clean it. If it’s broken, we fix it. That distinction means a property manager off La Cienega doesn’t pay for cleaning twice because nobody addressed the underlying gap.
If you’re in Beverly Grove and looking for local service, this is our Beverly Grove service area page with more detail on how we cover the 90048.
Styles & brands we work with
- Whole-home duct cleaning
- Dryer vent cleaning
- Camera inspection
- Sanitizing & deodorizing
Common Lennox Air Duct Cleaning Problems We Solve in Beverly Grove
- Unfiltered return plenums on original Lennox furnaces. The 1950s-1970s apartment buildings along Fairfax and La Cienega corridors often have Lennox furnaces with return-air plenums that were never designed to hold a modern filter. Lint, dry dust, and Santa Ana ash pack straight into the plenum and drop-leg before any filter element can catch them. We remove that material and install a proper filter rack where the plenum footprint allows.
- Lennox Pulse furnace intake screens fouled with fine dry dust. Early high-efficiency Pulse furnaces use a sealed secondary heat exchanger and condensate system. That design traps fine dry dust in the intake screen and blower wheel, cutting airflow and causing short cycling. Beverly Grove’s dry Mediterranean climate produces exactly the kind of ultra-fine dust that cakes onto those components. We clean the intake, blower wheel, and condensate passages with Nikro agitation tools.
- Leaky rigid galvanized Lennox supply runs. Short rigid galvanized supply runs are common in Beverly Grove’s low-rise stock. The joints on these older Lennox systems were never mastic-sealed, so they leak ash and dust back into occupied space. A Santa Ana event can leave a gray film on registers within days. We seal those joints with mastic after cleaning, which is the only way the work holds.
- Felted dust mats on decades-old Lennox air handlers and evaporator coils. Multi-unit buildings in 90048 run Lennox air handlers that have been in service for decades. Dry dust and lint form a felted mat on the evaporator coil and blower wheel, dragging amp draw and coil performance down. No moisture problem shows, so it gets ignored until airflow fails. We clean the coil and blower assembly in place using contained negative-air methods.
- Shared return chases serving multiple metered units. This is the one that catches landlords off guard. A Lennox return chase in a Beverly Grove duplex or fourplex often serves several apartments off one plenum. Cleaning one unit without tracing the shared airflow means you haven’t actually solved anything. We document airflow per unit before we touch a single register.
Lennox Service in Beverly Grove: What Local Conditions Mean for Your Equipment
Beverly Grove’s 90048 rental stock is dominated by shared-ductwork buildings split between individually metered units. That’s a structural fact about this neighborhood’s housing, and it changes how Lennox air duct cleaning has to be done here. A Lennox return chase in a fourplex off La Cienega often serves three or four apartments from one plenum. So when a landlord funds a cleaning on one meter, we can’t bill or schedule it like a single-family job. We have to trace and document airflow per unit first. That means opening the plenum, mapping which supply runs branch to which unit, and confirming what’s shared before we put a brush in the duct. A generic crew might clean what they can reach and call it done. We don’t, because the next tenant complaint will land on the property manager’s phone, not ours.
On a Spanish-Revival duplex off Fairfax near the 90048 line, a downstairs tenant had gray film on the registers three days after a Santa Ana event. Our tech found the original Lennox upflow furnace plenum packed with ash and lint because the return chase had no filter rack at all. We pulled the return and supply runs, cleaned the blower and evaporator coil, and set a proper Lennox-style filter rack with mastic-sealed joints at the plenum. The register film stopped returning on the next wind event.
Lennox Models & Products We Service in Beverly Grove
We work on the Lennox equipment still running in Beverly Grove’s housing stock: the G26 and G40 series horizontal and upflow furnaces, the early high-efficiency Pulse furnace, Merit series gas furnaces, and the 10ACX and 14ACX air conditioners paired with older Lennox air handlers. When original Lennox components need replacing, we fit OEM Lennox filter racks, plenum gaskets, and blower components where the footprint demands it, just as we do for Lennox repair in Bel Air. Where the building allows flexibility, we use quality aftermarket flex duct, mastic, and sealing materials. The rule is straightforward: on most of these systems, cleaning and sealing the existing Lennox ductwork is the right call. We only recommend replacement when the heat exchanger or plenum is physically compromised, not just dirty.
See the difference
Before
After
Before
After
Before
AfterLennox Service Pricing in Beverly Grove
Air duct cleaning in Beverly Grove typically runs $285 to $520 for a condo or apartment unit, and $500 to $900+ for a full multi-unit building or larger single-family home, depending on system size, access, and how long it’s been since the last cleaning. What drives the cost here is what we find in the plenum. Older Lennox systems without filter racks take longer because the buildup is compressed and packed into the drop-leg. Shared return chases take longer because we document airflow per unit before we start. The free estimate includes a visual inspection of the plenum, register count, and access points. No per-vent pricing, no bait-and-switch. One flat price per system, agreed before work starts. Call (866) 472-7239 and we’ll walk the system with you.
| Service Type | Typical Beverly Grove Range |
|---|---|
| Condo / apartment unit (single meter) | $285 – $520 |
| Full system cleaning with negative-air containment | $450 – $700 |
| Multi-unit building / larger single-family home | $500 – $900+ |
| Mastic sealing of accessible joints (add-on) | $150 – $350 |
| Filter rack install where plenum lacks one | $220 – $480 |
Serving Beverly Grove, CA – Our Local Coverage Area
We’re based in the Beverly Grove area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs – Lennox Air Duct Cleaning in Beverly Grove
No. We’re an independent duct cleaning and repair shop, not a Lennox dealer or authorized service provider. That independence means we work on Lennox equipment on its own merits. We fit OEM Lennox parts where the original footprint demands them and use quality aftermarket materials where the building allows. No brand loyalty fees, no dealership markup.
Yes, and this is the bulk of our Beverly Grove work. We handle multi-unit Lennox buildings where return chases are shared but meters are split per unit. We trace and document airflow per unit before cleaning, so the landlord knows exactly what was cleaned, what was shared, and what needs sealing. That documentation matters for tenant communication and future maintenance scheduling. Call (866) 472-7239 to set up a walkthrough.
Most single-unit jobs take 2 to 4 hours. Multi-unit buildings with shared return chases take longer because we’re documenting per-unit airflow, not just running a brush through the trunk line. A fourplex off Fairfax with original Lennox G40s might run a full day if multiple units need plenum work and sealing.
G26 and G40 series furnaces, the early Pulse high-efficiency furnace, Merit series gas furnaces, and 10ACX/14ACX air conditioners paired with older Lennox air handlers. If the equipment in your Beverly Grove building is older than that, call us anyway. We’ve seen enough original Lennox work in 90048 that we can assess it honestly.
Plan on $285 to $520 for a single apartment or condo unit, $450 to $700 for a full system with negative-air containment, and $500 to $900+ for larger buildings. The free estimate covers a plenum inspection, register count, and access review. No per-vent charges, no coupons that balloon once the van arrives. Call (866) 472-7239 for an exact quote.
Service Areas Near Beverly Grove
We serve Beverly Grove and the surrounding neighborhoods. If you’re across the line in Tarzana, that’s our home base. We also cover Lennox service in Winnetka, Sawtelle, Cheviot Hills, and the NoHo Arts District. Same equipment, same process, same accountability.
Book Your Lennox Service in Beverly Grove Today
We work on Beverly Grove Lennox systems every week, and on Lennox in Sawtelle as well. If your registers are filming gray after Santa Ana events, or your Pulse furnace is short cycling, call (866) 472-7239. Free estimate, one flat price per system, before-and-after photos of your own ducts. Clean ducts don’t need a sales pitch – the before-and-after photos do the talking.
Written by Noel Fairbanks, Owner at Air Duct Cleaning Tarzana, serving Beverly Grove since day one.